Metal decorative inks are manufactured with Soya oil based alkyd resin.
Inks are used for surface printing. It has an excellent printability and a very good color reproduction.
PRINTING: Offset Printing Process
APPLICATION: Ink is specially designed for surface printing as it has very good scratch and rubs resistance properties. It is highly recommended for printing on metal substrates.
SUBSTRATES: Metal substrates
For printing on other substrates not mentioned above please contact with representative of EASTLAND INK.
Characteristics:
PRESS CONDITION: Dust free environment and moderate press conditions.
REDUCERS: EIC Reducer is recommended for reduction of ink.
Important Note. Inferior reducer can change the reheology of ink due to presence of some unwanted impurities like moisture contents. Moisture, retained in solvent will cause poor printability, poor gloss, and poor adhesion
Color range: Metal decorative inks are available in wide variety of color range. However on demand special colors can be developed. Pigments used have good light fastness, however extensive exposure of direct sunlight is not recommended. For requirement of such characteristics kindly consult our Representative.
Important Note: Information given above is based on experience at Machines and after necessary laboratory testing. However, the product’s performance and its suitability for the customer’s purchase depend on the particular conditions of use and the material being printed. We recommend that customer satisfy themselves that each product meets their requirements in all respects before commencing a print run. Since we cannot anticipate or control the conditions under which our products are used, it is not possible to guarantee their performance. We would point out that the information contained in this leaflet is only a recommendation, and may need to be altered to suit the conditions and efficiency of the equipment employed.