HFR Ink series is NC PU based flexo ink used for oil and ghee pouches. HFR has an excellent printability on LDPE and a very good color reproduction.
PRINTING: Flexo graphic process.
APPLICATION: This ink is specially designed for oil and ghee pouches.
SUBSTRATES: Corona treated LDPE films (treatment not less than 38dynes /cm)
For printing on other substrates not mentioned above please contact with representative of EASTLAND INKS.
Characteristics:
Excellent Mileage.
Very good after printing results like rubbing, Scratch and COF Properties.
Excellent Gloss.
Excellent heat resistant properties.
PRESS CONDITION: Machine Speed = 60-100 m/min
Machine Temp. = 50 – 60°C (For colors)
65 – 70°C (For white)
REDUCERS: Reducers used for HFR Ink series are mentioned below.
IPA: ETHYL ACETATE: GLYCOL (80:15:5)
For any problem during printing please contact with representative of EASTLAND INKS.
Color range: HFR ink series is available in wide variety of color range. However on demand special colors can be developed. Pigments used have good light fastness, however extensive exposure of direct sunlight is not recommended. For requirement of such characteristics kindly consult our Representative.
Important Note: Information’s given above are based on experience at Machines and after necessary laboratory testing. However, the product’s performance and its suitability for the customer’s purchase depend on the particular conditions of use and the material being printed. We recommend that customer satisfy themselves that each product meets their requirements in all respects before commencing a print run. Since we cannot anticipate or control the conditions under which our products are used, it is not possible to guarantee their performance. We would point out that the information contained in this leaflet is only a recommendation, and may need to be altered to suit the conditions and efficiency of the equipment employed.